Portkeys Monitor BM5 III WR

Portkeys BM5 III WR (Wireless Camera Control)

The Portkeys BM5 III WR is a lightweight, rugged 5.5-inch Wide Color Gamut on-camera monitor with 2,200nits of brightness, HDMI/SDI video inputs, one SDI output with HDMI cross-conversion and wired/wireless camera control capabilities.

Note:
The BM5 III WR does have wireless camera control capabilities. If you need such a feature, please choose this monitor and NOT teh BM5 III and visit our download section for more information which cameras can be controlled.

Features:

• 5.5-inch, 10-bit panel with a resolution of 1920 x 1080 and a 1000:1 contrast ratio.
• Daylight-viewable with a maximum brightness of 2,200nits.
• 1x 3G-SDI input, 1x HDMI input, 1x 3G-SDI output with cross-conversion.
• Professional monitoring tools: Waveform, Vectorscope, Peaking, ARRI False Color.
• 3D LUT monitoring and 3D LUT SDI output capabilities.
• RED Approved: wireless camera control for the RED Komodo and V-RAPTOR.
• Wireless camera control for most Sony and Blackmagic Design cameras.
• Wired camera control for Sony, Canon, Panasonic, BMD, and ZCAM E2.
• TILTA Nucleus N/M wireless follow focus wired control.
• Built-in Sony NP-F style battery plate.
• 4-pin 7.4V-24V power input for external power (D-Tap cable included).
• Lightweight and rugged aluminum housing: only 376g/13.2oz.

The housing of the BM5 III WR is entirely made of rugged aluminum housing and has toughened glass in front of the display. However, with a weight of only 376g/13.2oz (without battery), it won’t add much poundage to your camera rig.

In the Box
1× BM5 III WR Monitor
1× Power Cord 100cm(4-pin aviation to D-tap)
1× Power Cord 40cm(4-pin aviation to DC)
1× L-Type Antenna
1× LANC Control Cable 40cm
1× Type-C Control Cable 40cm
1× Warm Prompt Card
1× Safety Box
1× USB (Manual, 3D LUTs, Firmware Inside)